TLIOT-PS9mA4P

The EIB/KNX power supply is used to provide and monitor the voltage of the EIB/KNX system，the output has two connection termi-nals，one is used for EIB bus power supply and signal transmission, onefor auxiliary power suppl. It can provide a power supply voltage of 30VDC to the terminal equipment. The bus connector has integrated areactor inside the power supply. If the auxiliary power supply terminal isconnected to an external reactor, it can also be used as the bus powersupply terminal, which also has the function of signal transmission.EIB / KNX power supply is modular installation equipment and can be mounted on 35mm d-rails for easy installation into the distribution box according to EN 60 715 design. The equipment adopts screw termi-nal to realize electrical connection，bus connections are directly connected through EIB terminals (red/black)，the auxiliary power supply is directly connected through the EIB wiring terminal (yellow/white), the input is connected to the 230V AC supply. Pressing the reset button to reset power on the device for 22S (22S does not include the time of button action). When the bus power supply fails, all other devices connected to the bus return to their original state. When the bus is disconnected for a long time, remove the bus power supply from the power.